|
| |
TM 5-2420-222-20-3
BACKHOE CONTROL VALVE-TO-BACKHOE STABILIZER CYLINDER OIL LINES - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
NOTE
If removing right side backhoe control valve-to-backhoe stabilizer cylinder oil lines, skip steps 11
thru 18.
11.
Special
Hose (2)
a.
Place drain pan underneath.
adapter (1)
b.
Using 1 1/8-inch and 1 1/4-inch open-
end wrenches, unscrew and take out.
c.
Cap (page 2-137).
d.
Plug adapter (1) (page 2-137).
e.
Tag (page 2-137).
12.
Union
Special
a.
Using 1 1/4-inch and 1 3/8-inch open-
adapter (3)
adapter (1)
end wrenches, unscrew and take out.
b.
Cap (page 2-137).
c.
Plug adapter (3) (page 2-137).
d.
Tag (page 2-137).
13.
Backhoe
Union adapter (3)
Using 1 1/4-inch, 1/2-inch drive socket
control valve (4)
with assembled
and ratchet handle, unscrew and take out.
packing (5)
14.
Union
Packing (5)
a.
Using pocket knife take off.
adapter (3)
b.
Get rid of.
NOTE
If only removing left side backhoe control valve-to-rod end stabilizer cylinder oil line, skip steps
15 thru 18.
15.
Special
Hose (7)
a.
Using 1 1/16-inch and 1 1/4-inch open-
adapter (6)
end wrenches, unscrew and take out.
b.
Cap (page 2-137).
c.
Tag (page 2-137).
16.
Union
Special
a.
Using 1 1/4-inch and 1 3/8-inch open-
adapter (8)
adapter (6)
end wrenches, unscrew and take out.
b.
Tag (page 2-137).
17.
Backhoe control
Union adapter (8)
Using 1 1/4-inch, 1/2-inch drive socket
valve (4)
with assembled
and ratchet handle, unscrew and take out.
packing (9)
2-1626
|
