|
| |
TM 5-2420-222-20-3
BOOM-TO-BUCKET CYLINDER OIL LINES (SERIAL NUMBERS 319995 THRU 342573 ONLY) - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
21. Dipperstick (5)
Bucket
a.
Using 200-pound capacity lifting
and guide
cylinder (9)
equipment, pivot away from dipper-
link (10)
stick (5) far enough to access tube
(1), connector (11), or adapter (3).
b.
Place wood blocks in position to support.
c.
Using 200-pound capacity lifting equipment
lower on to wood blocks.
NOTE
If removing boom-to-rod end bucket cylinder oil line, skip steps 22 thru 24.
22. Connector (11)
Tube (1)
a.
Note relative position for proper
placement during installation.
b.
Using two 1-inch open-end wrenches,
unscrew and take off.
TA243506
2-1613
|
