|
| |
TM 5-2420-222-20-3
BOOM-TO-BUCKET CYLINDER OIL LINES (SERIAL NUMBERS 235786 THRU 235999 ONLY) - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
4. Boom (1) and four
Three clamps
Take off.
tubes (7 thru 10)
(2 thru 4) and
spacer (5)
WARNING
Do not attempt to disconnect hydraulic lines and fittings while engine is running or
before hydraulic system pressure has been released. When engine is running,
hydraulic system is under pressure. Hydraulic system pressure should be 0 psi (0
kPa) before lines are disconnected. A line or fitting disconnected under pressure
will blow off with a lot of force and could cause serious injury to personnel.
Be careful when draining hot fluids. Wear gloves to protect your hands from hot
parts and fluids or severe burns could result.
5. Tube (7 or8)
Hose (11 or 12)
a.
Place drain pan underneath.
b.
Using 7/8-inch and 1-inch open-end
wrenches, unscrew and take out.
c.
Cap (page 2-137).
d.
Tag (page 2-137).
2-1599
|
