|
| |
TM 5-2420-222-20-3
BACKHOE CONTROL VALVE-TO-MANIFOLD BLOCK OIL LINES - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
26.
Backhoe control
a.
Operate backhoe controls
valve-to-manifold
(TM 5-2420-222-10) and check for leaks.
block oil lines
b.
If leaking at any connection, tighten
using 11/16-inch, 7/8-inch and 1-inch
open-end wrenches.
c.
If leaking does not stop, shut down
engine (TM 5-2420-222-10) and
replace leaking connection packing,
fitting, or hose as outlined in this
task.
d.
If found leaking, repeat steps 24
thru 26.
27.
Engine
If still running, shut down
(TM 5-2420-222-10).
28.
Two handle mounts
Two nuts (12)
Using 15/16-inch open-end wrench,
(10) and two four-
loosen.
way levers (11)
29.
Two handle
Two four-way
Noting relative positions, unscrew and
mounts (10)
levers (11)
take out.
2-1563
|
