|
| |
TM 5-2420-222-20-3
JAW CYLINDER OIL HOSES - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
1.
Tube (1)
Hose (2)
a.
Place drain pan underneath.
b.
Using 3/4-inch and 7/8-inch open-
end wrenches, unscrew and take off.
c.
Cap tube (1) (page 2-137).
d.
Tag (page 2-137).
2.
Spacer (3)
Hose (2)
a.
Note routing for proper placement
during installation.
b.
Uncoil and take off.
NOTE
If removing jaw cylinder rod end oil hose, skip step 3.
3.
Cylinder barrel (4)
Hose (2)
a.
Place drain pan underneath.
b.
Using 11/16-inch open-end wrench,
unscrew and take out.
c.
Tag (page 2-137).
d.
Plug cylinder barrel (4) (page 2-137).
e.
Get rid of drained fluid (page 2-137).
2-1545
|
