|
| |
TM 5-2420-222-20-3
BOOM-TO-JAW CYLINDER OIL HOSE OIL LINES (SERIAL NUMBERS 319995 THRU 342573 ONLY) - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
ASSEMBLY
15.
Tube (1)
Hose (2)
a.
Take off tag.
b.
Screw on and tighten to same relative
position noted during removal using
3/4-inch and 7/8-inch open-end
wrenches.
INSTALLATION
16.
Dipperstick (3)
Tube (1) with
Place in position.
assembled hose (2)
17.
Dipperstick (3) and
Guard (5) and two
Place in position.
two tubes (1 and 4)
clamps (6)
18.
Guard (5), two
Two screws (7),
Screw in and tighten using 9/16-inch,
clamps (6), and
washers (8), and
3/8-inch drive socket and ratchet
dipperstick (3)
new lockwashers (9)
handle.
19.
Two tubes (1 and
Two clamps
Place in position.
10) and stud (11)
(12 and 13)
20.
Stud (11) and
New special
Screw in and tighten using 9/16-inch,
clamp (12)
nut (14)
3/8-inch drive socket and ratchet
handle.
21.
Tube (1)
Hose (15)
a.
Unplug.
b.
Take off tag.
c.
Screw on and tighten using 3/4-inch
and 7/8 inch open-end wrenches.
22.
Tube (16)
Hose (2)
a.
Uncap tube (16).
b.
Take off tag.
c.
Screw on and tighten using 7/8 inch
open-end wrench.
23.
Loader backhoe
Transmission
Check fluid level and add proper amount
and grade (TM 5-2420-222-10).
24.
Engine
Start and run at high idle
(TM 5-2420-222-10).
2-1542
|
