|
| |
TM 5-2420-222-20-3
JAW DIRECT LINEAR VALVE-TO-HYDRAULIC OIL FILTER RELIEF VALVE OIL LINE (SERIAL NUMBERS 319995
THRU 342573 ONLY) - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
CLEANING - CONTINUED
12
Hose (1)
a. Using clean rags dampened in solution
of detergent and water, wipe clean.
b. Rinse with clean water.
c. Using clean, dry rags, wipe dry.
INSPECTION/REPLACEMENT
NOTE
For more information on how to inspect parts, go to General Maintenance Instructions (page 2-
137).
Replace defective parts as needed.
13
Hose (1)
Look for cracks, breaks, cuts, and tears.
14
All metal parts
Look for cracks and breaks.
15
All threaded parts
Look for damaged threads.
ASSEMBLY
16
Elbow (2)
Tee (3)
a. Place elbow (2) in machinist’s vise.
b. Screw in and tighten to same relative
position noted during disassembly
using 1 1/4-inch open-end wrench.
c. Take elbow (2) out of machinist’s
vise.
17
Union adapter (4)
Tee (3) with
a. Place union adapter (4) in machinist’s
assembled elbow (2)
vise.
b. Screw in and tighten to same relative
position noted during disassembly
using 1 1/4-inch open-end wrench.
c. Take union adapter (4) out of
machinist’s vise.
INSTALLATION
18
Connector (5)
New packing (6)
Place in position.
2-1468
|
