|
| |
TM 5-2420-222-20-3
JAW DIRECT LINEAR VALVE-TO-HYDRAULIC OIL FILTER RELIEF VALVE OIL LINE (SERIAL NUMBERS 319995
THRU 342573 ONLY) - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
4.
Union adapter (1)
Hose (2)
a. Place drain pan underneath.
b. Using 1 1/8-inch and 1 1/4-inch open-
end wrenches, unscrew and take out.
c. Tag (page 2-137).
5.
Elbow (3)
Hose (4)
a. Using 1 1/8-inch and 1 1/4-inch open-
end wrenches, unscrew and take out.
b. Cap (page 2-137).
c. Tag (page 2-137).
6.
Connector (5)
Tee (6) with
a. Note relative position for proper
assembled parts
placement during installation.
b. Using 1 1/4-inch open-end wrench,
unscrew and take out.
7.
Jaw direct linear
Connector (5)
a. Using 1 1/2-inch, 3/4-inch drive
valve (7)
with assembled
socket and ratchet handle, unscrew
packing (8)
and take out.
b. Plug valve (7) (page 2-137).
c. Get rid of drained fluid (page 2-137).
8.
Connector (5)
Packing (8)
a. Using pocket knife, take off.
b. Get rid of.
DISASSEMBLY
9. Union adapter (1)
Tee (6)
a
Place union adapter (1) in machinist’s
with assembled
vise.
elbow (3)
b. Note relative position for proper
placement during assembly.
c. Using 1 1/4-inch open-end wrench,
unscrew and take off.
d. Take union adapter (1) out of
machinist’s vise.
10
Elbow (3)
Tee (6)
a. Place elbow (3) in machinist’s vise.
b. Note relative position for proper
placement during assembly.
c. Using 1 1/4-inch open-end wrench,
unscrew and take off.
d. Take elbow (3) out of machinist’s vise.
2-1466
|
