|
| |
TM 5-2420-222-20-3
MANIFOLD-TO-JAW CONTROL VALVE OIL LINES (SERIAL NUMBERS 235786 THRU 235999 ONLY) - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
23
Elbow (1)
Nut (2)
Screw on all the way.
24
New packing (3)
Place in position.
25
Manifold (4)
Elbow (1) with
a. Unplug manifold (4).
attached parts
b. Screw in and tighten to same relative
position noted during removal using
open-end wrench.
26
Elbow (1) and
Nut (2)
Using open-end wrenches, tighten until
manifold (4)
seated against manifold (4).
27
Elbow (1)
Hose (5)
a. Take off tag.
b. Screw on and tighten using open-end
wrenches.
28
Loader backhoe
Transmission
Check fluid level and add proper amount
and grade (TM 5-2420-222-10).
29
Engine
Start and run at high idle
(TM 5-2420-222-10).
30
Manifold-to-jaw
a. Check for leaks.
control valve
b. If leaking at any connection, tighten
oil lines
using open-end wrenches.
c. If leaking does not stop, shut down
engine (TM 5-2420-222-10) and
replace leaking connection packing,
fitting, or hose as outlined in this
task.
d. If found leaking, repeat steps 28
thru 30.
31
Engine
If still running, shut down
(TM 5-2420-222-10).
2-1462
|
