|
| |
TM 5-2420-222-20-3
MANIFOLD-TO-HYDRAULIC IMPACTOR VALVE OIL LINE (SERIAL NUMBERS 235786 THRU 235999 ONLY) -
CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
2.
Elbow and packing
Nut (3)
Using 1 1/8-inch and 1 1/4-inch open-
assembly (1) and
end wrenches, loosen.
valve (2)
3.
Valve (2)
Elbow and packing
a.
Note relative position for proper
assembly (1)
placement during installation.
b.
Using 1 1/8-inch open-end wrench,
unscrew and take out.
c.
Plug valve (2) (page 2-137).
4.
Elbow and packing
Hose (5)
a.
Place drain pan underneath.
assembly (4)
b.
Using 1 1/4-inch open-end wrench,
unscrew and take off.
c.
Tag (page 2-137).
5.
Elbow and packing
Nut (7)
Using 1 1/8-inch and 1 1/4-inch open-
assembly (4) and
end wrenches, loosen.
manifold (6)
6.
Manifold (6)
Elbow and packing
a.
Note relative position for proper
assembly (4)
placement during installation.
b.
Using 1 1/8-inch open-end wrench,
unscrew and take out.
c.
Plug manifold (6) (page 2-137).
d.
Get rid of drained fluid (page 2-137).
CLEANING
NOTE
For more information on how to clean parts, go to General Maintenance
Instructions (page 2-137).
7.
Hose (5)
a.
Using clean rags dampened in solution
of detergent and water, wipe clean.
b.
Rinse with clean water.
c.
Using clean, dry rags, wipe dry.
2-1446
|
