|
| |
TM 5-2420-222-20-3
BACKHOE CONTROL VALVE-TO-MANIFOLD OIL LINES (SERIAL NUMBERS 235786 THRU 235999 ONLY) -
CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
22.
Adapter (1)
Hose (2)
a.
Take off tag.
b.
Screw in and tighten using 1 1/8-
inch and 1 1/4-inch open-end
wrenches.
23.
Loader backhoe
Transmission
Check fluid level and add proper amount
and grade (TM 5-2420-222-10).
24.
Engine
Start and run at high idle
(TM 5-2420-222-10).
25.
Backhoe control
a.
Check for leaks.
valve-to-manifold
b.
If leaking at any connection, tighten
oil lines
using 1 1/8-inch, 1 1/4-inch, and
1 3/8-inch open-end wrenches.
c.
If leaking does not stop, shut down
engine (TM 5-2420-222-10) and
replace leaking connection packing,
fitting, or hose as outlined in this
task.
d.
If found leaking, repeat steps 23
thru 25.
26.
Engine
If still running, shut down
(TM 5-2420-222-10).
2-1434
|
