|
| |
TM 5-2420-222-20-3
JAW DIRECT LINEAR VALVE-TO-HYDRAULIC IMPACTOR VALVE OIL LINE (SERIAL NUMBERS 319995 THRU
342573 ONLY) - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
32.
Engine
Start and run at high idle
(TM 5-2420-222-10).
33.
Jaw direct linear
a.
Check for leaks.
valve-to-impactor
b.
If leaking at any connection, tighten
valve oil line
using 1 1/16-inch, 1 1/8-inch, and
two 1 1/4-inch open-end wrenches.
c.
If leaking does not stop, shut down
engine (TM 5-2420-222-10) and
replace leaking connection packing,
fitting, or hose as outlined in this
task.
d.
If found leaking, repeat steps 31
thru 33.
34.
Engine
If still running, shut down
(TM 5-2420-222-10).
TASK ENDS HERE
2-1428
|
