|
| |
TM 5-2420-222-20-3
BACKHOE CONTROL VALVE-TO-JAW DIRECT LINEAR VALVE OIL LINE (SERIAL NUMBERS 319995 THRU 342573
ONLY) - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
39.
Transmission
Check fluid level and add proper amount
and grade (TM 5-2420-222-10).
40.
Engine
Start and run at high idle
(TM 5-2420-222-10).
41.
Backhoe control
a.
Check for leaks.
valve-to-jaw
b.
If leaking at any connection, tighten
direct linear
using 1 1/8-inch, two 1 1/4-inch, and
valve oil line
1 3/8-inch open-end wrenches.
c.
If leaking does not stop, shut down
engine (TM 5-2420-222-10) and
replace leaking connection packing,
fitting, or hose as outlined in this
task.
d.
If found leaking, repeat steps 39
thru 41.
42.
Engine
If still running, shut down
(TM 5-2420-222-10).
NOTE
FOLLOW-ON MAINTENANCE:
1.
Install backhoe valve box cover (page 2-1157).
2.
Install right rear platform (page 2-1110).
TASK ENDS HERE
2-1420
|
