|
| |
TM 5-2420-222-20-3
PRESSURE CONTROL VALVE-TO-JAW DIRECT LINEAR VALVE OIL LINE (SERIAL NUMBERS 319995 THRU
342573 ONLY) - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
23.
Connector (1)
Tee (2) with
Screw on and tighten to same relative
assembled parts
position noted during removal using
two 1 1/4-inch open-end wrenches.
24.
Tee (2)
Hose (3)
a.
Unplug.
b.
Take off tag.
c.
Screw on and tighten using 1 1/4-
inch open-end wrench.
25.
Elbow (4)
Hose (5)
a.
Uncap.
b.
Take off tag.
c.
Screw in and tighten using 1 1/16-
inch and 1 1/4-inch open-end
wrenches.
26.
Tee (6)
Hose (7)
a.
Take off tag.
b.
Screw in and tighten using 1 1/16-
inch and 1 1/4-inch open-end
wrenches.
27.
Adapter (8)
Nut (9)
Screw on all the way.
28.
New packing (10)
Place in position.
29.
Pressure control
Adapter (8)
a.
Unplug valve (11).
valve (11)
with assembled
b.
Place valve (11) in machinist’s vise.
packing (10)
c.
Screw in and tighten to same relative
position noted during removal using
1 1/4-inch open-end wrench.
30.
Pressure control
Nut (9)
a.
Using two 1 1/4-inch open-end
valve (11) and
wrenches, tighten until seated against
adapter (8)
valve (11).
b.
Take valve (11) out of machinist’s
vise.
31.
Loader backhoe
Pressure control
Install (page 2-1200).
valve
32.
Transmission
Check fluid level and add proper amount
and grade (TM 5-2420-222-10).
33.
Engine
Start and run at high idle
(TM 5-2420-222-10).
2-1410
|
