|
| |
TM 5-2420-222-20-3
PRESSURE CONTROL VALVE-TO-MANIFOLD OIL LINE (SERIAL NUMBERS 235786 THRU 235999 ONLY) -
CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
19.
Valve (1)
Union adapter (2)
Screw in and tighten to same relative
with assembled parts
position noted during removal using
1 1/4-inch open-end wrench.
20.
Valve (1) and
Nut (3)
Using two 1 1/4-inch open-end wrenches,
union adapter (2)
tighten until seated against valve (1).
21.
Loader backhoe
Pressure control
Install (page 2-1200).
valve
22.
Transmission
Check fluid level and add proper amount
and grade (TM 5-2420-222-10).
23.
Engine
Start and run at high idle
(TM 5-2420-222-10).
24.
Pressure control
a.
Check for leaks.
valve-to-manifold
b.
If leaking at any connection, tighten
oil line
using 1 1/16-inch, 1 1/4-inch, and
two 1 1/4-inch open-end wrenches.
c.
If leaking does not stop, shut down
engine (TM 5-2420-222-10) and
replace leaking connection packing,
fitting, or hose as outlined in this
task.
d.
If found leaking, repeat steps 22
thru 24.
25.
Engine
If still running, shut down
(TM 5-2420-222-10).
2-1404
|
