|
| |
TM 5-2420-222-20-3
JAW CONTROL (DIRECT LINEAR) VALVE TUBES AND FITTINGS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
21.
Tee (1) and
Tube (3)
a.
Take off tag.
elbow (2)
b.
Screw on and tighten using 7/16-inch
open-end wrench.
22.
Tee (1) and
Tube (5)
a.
Take off tag.
elbow (4)
b.
Screw on and tighten using 7/16-inch
open-end wrench.
23.
Loader backhoe
Transmission
Check fluid level and add proper amount
and grade (TM 5-2420-222-10).
24.
Engine
Start and run at high idle
(TM 5-2420-222-10).
25.
Jaw control
a.
Check for leaks.
(direct linear)
b.
If leaking at any connection, tighten
valve tubes
using 7/16-inch, 1/2-inch, and 5/8-
and fittings
inch open-end wrenches.
c.
If leaking does not stop, shut down
engine (TM 5-2420-222-10) and
replace leaking connection packing,
fitting, or tube as outlined in this
task.
d.
If found leaking, repeat steps 23
thru 25.
26.
Engine
If still running, shut down
(TM 5-2420-222-10).
2-1398
|
