|
| |
TM 5-2420-222-20-3
HYDRAULIC PUMP PRESSURE LINE TEE-TO-HYDRAULIC ACCUMULATOR OIL LINE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSPECTION/REPLACEMENT
NOTE
For more information on how to inspect parts, go to General Maintenance Instructions (page 2-
137).
Replace defective parts as needed.
9.
Hose (1)
Look for cracks, breaks, and tears.
10.
All metal parts
Look for cracks and breaks
11.
All threaded parts
Look for damaged threads.
INSTALLATION
12
Tee (2)
Nut (3)
Screw on all the way.
13.
New packing (4)
Place in position.
14
Accumulator (5)
Tee (2) with
a
Unplug accumulator (5).
assembled parts
b
Screw in and tighten tee (2) to
and orifice (6)
same position noted during removal
with assembled
using 3/4-inch open-end wrench.
spring (7)
15
Accumulator (5)
Nut (3)
Using 3/4-inch and 7/8-inch open-end
and tee (2)
wrenches, tighten until seated against
accumulator (5).
16
Accumulator (5)
Screw (9) and
Screw in and tighten using 9/16-inch
and bracket (8)
new lockwasher (10)
box wrench.
NOTE
Steering valve-to-accumulator tee steering hoses on loader backhoes with Serial Numbers 235786
thru 235999 are different configuration from those with Serial Numbers 319995 thru 342573.
2-1388
|
