|
| |
TM 5-2420-222-20-3
HYDRAULIC PUMP-TO-HYDRAULIC OIL COOLER OIL LINE (SERIAL NUMBERS 235786 THRU 235999 ONLY)
This task covers:
a. Removal (page 2-1342)
c.
Inspection/Replacement (page 2-1344)
b. Cleaning (page 2-1343)
d.
Installation (page 2-1344)
INITIAL SETUP:
Tools
Personnel Required
Pan, drain
One
Screwdriver, flat-tip, 3/16-inch
Equipment Condition
Materials/Parts
1.
Loader bucket support installed
Detergent, GP (item 7, Appendix C)
(page 2-1830)
Rags, wiping (item 21, Appendix C)
2.
Hood removed (page 2-1025)
Solvent, drycleaning
(item 28, Appendix C)
Tags, marking (item 30, Appendix C)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Be careful when draining hot fluids. Wear gloves to protect your hands from hot
parts and fluids or severe burns could result.
1. Hose (1)
Two clamps (2)
a.
Place drain pan underneath.
b.
Using 3/16-inch flat-tip screwdriver,
loosen.
2. Hose (3)
Two clamps (4)
a.
Place drain pan underneath.
b.
Using 3/16-inch flat-tip screwdriver,
loosen.
3. Two hoses Oil line (5)
a.
Pull off.
(1 and 3)
b.
Let fluid drain into drain pan.
c.
Get rid of drained fluid (page 2-137).
d.
Tag (page 2-137).
4. Hose (1)
Two clamps (2)
Slide off.
5. Oil cooler(6)
Hose (1)
a.
Pull off.
b.
Cap oil cooler (6) (page 2-137).
2-1342
|
