|
| |
TM 5-2420-222-20-3
PUMP STROKE CONTROL VALVE FILTER ELEMENT - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
2.
Filter element (4)
a.
Using 1/8-inch flat-tip screwdriver,
and two packings (5)
take out.
b.
Get rid of packing (5).
c.
Plug housing (1) (page 2-137).
d.
Get rid of drained fluid (page 2-137).
3.
Plug (2)
Packing (3)
a.
Using pocket knife, take off.
b.
Get rid of.
CLEANING
NOTE
For more information on how to clean parts, go to General Maintenance Instructions (page 2-137).
WARNING
Drycleaning solvent P-D-680 is toxic and flammable. Wear protective goggles and gloves and use
only in a well ventilated area. Avoid contact with skin, eyes, and clothes and don’t breathe vapors.
Do not use near open flame or excessive heat. The flashpoint is 100°F to 138°F (38° to 59°C). If
you become dizzy while using cleaning solvent, get fresh air immediately and get medical aid. If
contact with eyes is made, wash your eyes with water and get medical aid immediately.
4.
Plug (2) and
a.
Clean in drycleaning solvent.
filter element (4)
b.
Using clean, dry rags, wipe dry.
2-1197
|
