|
| |
TM 5-2420-222-20-3
HYDRAULIC PUMP-TO-HYDRAULIC OIL COOLER HOSE (SERIAL NUMBERS 319995 THRU 342573 - ONLY)
This task covers:
a. Removal (page 2-1338)
c. Inspection/Replacement (page 2-1340)
b. Cleaning (page 2-1339)
d. Installation (page 2-1340)
INITIAL SETUP:
Tools
Personnel Required
Pan, drain
One
Screwdriver, flat-tip, 3/16-inch
Equipment Condition
Materials/Parts
1.
Loader bucket support installed
Detergent, GP (item 7, Appendix C)
(page 2-1830)
Rags, wiping (item 21, Appendix C)
2.
Hood removed (page 2-1025)
Solvent, drycleaning
(item 28, Appendix C)
Tags, marking (item 30, Appendix C)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Be careful when draining hot fluids. Wear gloves to protect your hands from hot
parts and fluids or severe burns could result.
1.
Hose (1)
Two clamps (2)
a.
Place drain pan underneath.
b.
Using 3/16-inch flat-tip screwdriver,
loosen.
2.
Oil cooler (3) and
Hose (1) with two
a.
Pull off.
special adapter (4)
assembled clamps (2)
b.
Let fluid drain into drain pan.
c.
Get rid of drained fluid (page 2-137).
d.
Cap oil cooler (3) and adapter (4)
(page 2-137).
e.
Tag (page 2-137).
3.
Hose (1)
Two clamps (2)
Take off.
2-1338
|
