|
| |
TM 5-2420-222-20-3
LOADER CONTROL VALVE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
9. Bracket (1)
Valve (2) with
a.
Have assistant take off.
assembled parts
b.
Allow fluid to drain into drain pan.
c.
Get rid of drained fluid (page 2-137).
DISASSEMBLY
10. Valve (2)
Connector (3) with
a.
Place valve (2) in machinist’s vise.
assembled
b.
Using 1 1/4-inch open-end wrench,
packing (4)
unscrew and take out.
11. Connector (3)
Packing (4)
a.
Using pocket knife, take off.
b.
Get rid of.
1
2. Valve (2)
Special connector
Using 1 1/4-inch inch open-end
(5) with assembled
wrench, unscrew and take out.
packing (6)
13. Special
Packing (6)
a.
Using pocket knife, take off.
connector (5)
b.
Get rid of.
14. Two long tees
Four nuts
Using two 1-inch inch open-end
(7 and 8), two
(11 thru 14)
wrenches, loosen.
tees (9 and 10),
and valve (2)
15. Valve (2)
Two long tees (7
a.
Note relative positions for proper
and 8) and two tees
placement during assembly.
(9 and 10) with
b.
Using 1-inch open-end wrench,
assembled parts
unscrew and take out.
c.
Take valve (2) out of machinist’s vise.
16. Two long tees
Four packings
a.
Using pocket knife, take off.
(7 and 8) and two
(15 thru 18)
b.
Get rid of.
tees (9 and 10)
CLEANING
NOTE
For more information on how to clean parts, go to General Maintenance Instructions
(page 2-137).
2-1288
|
