|
| |
TM 5-2420-222-20-2
LOADER CONTROL BOX - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
27. Right fender (1)
Five nuts (3), new
With help of assistant, screw together
and control box (2)
lockwashers (4),
and tighten using 9/16-inch, 3/8-inch
and bolts (5)
drive socket and ratchet handle.
28. Control box (2) and
Throttle lever (6)
Place in position.
right fender (1)
with attached parts
29. Control box (2)
Throttle stop (8)
Place in position.
and throttle lever
bracket (7)
30. Control box (2),
Nut (9), new
With help of assistant, screw together
throttle lever
lockwasher (10),
and tighten using 9/16-inch, 3/8-inch
bracket (7), and
and bolt (11)
drive socket and ratchet handle.
right fender (1)
31. Control box (2),
Two washers (12),
Positioning throttle stop (8) as noted
throttle stop (8),
new lockwashers
during removal, screw in and tighten
and throttle lever
(13), and
using 7/16-inch open-end wrench.
bracket (7)
screws (14)
32. Throttle lever (6)
Knob (15)
Place in position.
33. Control box (2)
Starter switch (16)
Place in position.
CAUTION
Tighten cap by metal base to keep from tearing.
34. Control box (2) and
Cap (17)
Screw on and tighten using slip-joint
starter switch (16)
pliers.
35. Control box (2)
Ignition lock
Place in position.
switch (18)
36. Control box (2)
Washer (19) and
Screw on and tighten using 1 1/8-inch
and ignition lock
special nut (20)
open-end wrench.
switch (18)
Switch may need to be held to keep
from turning.
37. Control box (2)
Engine starting aid
Place in position.
solenoid switch (21)
2-1176
|
