|
| |
TM 5-2420-222-20-2
LOADER CONTROL BOX - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
DISASSEMBLY
NOTE
Do not remove decal unless inspection shows need for replacement. Removal may damage parts.
18.
Decals and
If damaged, remove (page 2-1186).
instruction labels
CLEANING
NOTE
For more information on how to clean parts, go to General Maintenance Instructions (page 2-137).
19.
Control box (1) and
a.
Using clean rags and solution of
decal, if present
detergent and water, wipe clean.
b.
Rinse with clean water.
c.
Using clean, dry rags, wipe dry.
WARNING
Drycleaning solvent P-D-680 is toxic and flammable. Wear protective goggles and gloves and use only in
a well ventilated area. Avoid contact with skin, eyes, and clothes and don’t breathe vapors. Do not use
near open flame or excessive heat. The flashpoint is 1000F to 1380F (380 to 590C). If you become dizzy
while using cleaning solvent, get fresh air immediately and get medical aid. If contact with eyes is made,
wash your eyes with water and get medical aid immediately.
20.
All other metal
a.
Clean in drycleaning solvent.
parts
b.
Using clean, dry rags, wipe dry.
INSPECTION/REPLACEMENT
NOTE
For more information on how to inspect parts, go to General Maintenance Instructions (page 2-137).
Replace defective parts which cannot be repaired.
2-1174
|
