|
| |
TM 5-2420-222-20-2
LOADER CONTROL BOX - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
7. Control box (1) and
Special nut (3)
Holding switch (2) to keep it from
ignition lock
and washer (4)
turning, using 1 1/8-inch open-end
switch (2)
wrench, unscrew and take off.
8. Control box (1)
Ignition lock
Take out.
switch (2)
CAUTION
Unscrew cap by metal base to keep from tearing.
9. Control box (1) and
Cap (6)
Using slip-joint pliers, unscrew and
starter switch (5)
take off.
10. Control box (1)
Starter switch (5)
Take out.
11. Throttle lever (7)
Knob (8)
Take off.
12. Control box (1),
Two screws (11),
a.
Note position of throttle stop (9) for
throttle stop (9),
lockwashers (12),
proper placement during installation.
and throttle lever
and washers (13)
b.
Using 7/16-inch open-end wrench,
bracket (10)
unscrew and take out.
c.
Get rid of lockwashers (12).
13.
Control box (1),
Bolt (15), lock-
a.
Using 9/16-inch, 3/8-inch drive
throttle lever
washer (16), and
socket and ratchet handle, unscrew
bracket (10), and
nut (17)
and take apart.
right fender (14)
b.
Get rid of lockwasher (16).
14.
Control box (1) and
Throttle stop (9)
Take off.
throtte lever
bracket (10)
15.
Control box (1) and
Throttle lever (7)
Take out.
right fender (14)
with attached parts
16.
Control box (1) and
Five bolts (18),
a.
Using 9/16-inch, 3/8-inch drive
right fender (14)
lockwashers (19),
socket and ratchet handle, unscrew
and nuts (20)
and take apart.
b.
Get rid of lockwasher (4).
2-1172
|
