|
| |
TM 5-2420-222-20-2
BACKHOE VALVE BOX COVER - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Two four-way levers
Two nuts (3)
Using 15/16-inch open-end wrench,
(1) and handle
loosen.
mounts (2)
2.
Two handle
Two four-way
Noting position for proper placement
mounts (2)
levers (1)
during installation, unscrew and take out.
3.
Two stabilizer
Two nuts (6)
Using 3/4-inch open-end wrench, loosen.
control levers (4)
and handle mounts (5)
4.
Two handle
Two stabilizer
Noting position for proper placement
mounts (5)
control levers (4)
during installation, unscrew and take out.
5.
Backhoe valve box
Four screws (9),
a.
Using 7/16-inch, 3/8-inch drive
(7) and cover (8)
lockwashers (10),
socket and ratchet handle, unscrew
and washers (11)
and take out.
b.
Get rid of lockwashers (10).
6.
Backhoe valve
Cover (8) with
Take off.
box (7)
assembled parts
DISASSEMBLY
CAUTION
Do not remove edging and decals unless inspection shows need for replacement. Removal may damage parts.
7.
Cover (8)
Decals and instruction
Remove (page 2-1186).
labels
8.
Edging (12)
Take off.
CLEANING
NOTE
For more information on how to clean parts, go to General Maintenance Instructions (page 2-137).
2-1158
|
