|
| |
TM 5-2420-222-20-2
SEAT BELT - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSPECTION/REPLACEMENT
NOTE
For more information on how to inspect parts, go to General Maintenance Instructions (page 2-137).
Replace defective parts as needed.
7.
Seat belt (1)
Look for tears and wear.
8.
All metal parts
Look for cracks, breaks, and abnormal
bends.
9.
All attaching
Look for damaged threads.
hardware
ASSEMBLY
10. Seat belt (1)
Two seat belt
Place in position.
brackets (2)
11. Seat belt (1) and
Two screws (3), four
Screw together and tighten using 7/8-inch,
two seat belt
washers (4), two new
1/2-inch drive socket and ratchet handle,
brackets (2)
lockwashers (5), and
3/4-inch open-end wrench.
two nuts (6)
INSTALLATION
12. Seat frame (7)
Two seat belt
Place in position.
brackets (2) with
attached seat belt (1)
13. Seat frame (7)
Two nuts (8), new
Screw together and tighten using 3/84inch,
and two seat
lockwashers (9),
1/2-inch drive socket and ratchet handle,
belt brackets (2)
and screws (10)
and 3/4-inch open-end wrench.
2-1152
|
