TM 5-2420-222-20-2 SEAT BELT This task covers: a. Removal (page 2-1150) d. Inspection/Replacement (page 2-1152) b. Disassembly (page 2-1150) e. Assembly (page 2-1152) c. Cleaning (page 2-1150) f. Installation (page 2-1152) INITIAL SETUP: Tools Materials/Parts - Continued Handle, ratchet, 1/2-inch drive Lockwasher, seat belt screw Socket, 1/2-inch drive, 3/4-inch (two required) Socket, 1/2-inch drive, 7/8-inch Rags, wiping (item 21, Appendix C) Wrench, open-end, 11/16-inch Solvent, drycleaning (item 28, Appendix C) Wrench, open-end, 3/4-inch Personnel Required Materials/Parts One Detergent, GP (item 7, Appendix C) Lockwasher, seat belt bracket screw and nut (four required) ACTION LOCATION ITEM REMARKS REMOVAL 1.    Seat frame (1) Two screws (3), a. Using 3/4-inch, 1/2-inch drive socket and two seat belt lockwashers (4), and ratchet handle, and 3/4-inch brackets (2) and nuts (5) open-end wrench, unscrew and take apart. b. Get rid of lockwashers (4). 2.    Seat frame (1) Two seat belt Take off. brackets (2) with attached seat belt (6) DISASSEMBLY 3.    Seat belt (6) and Two screws (7), four a. Using 7/8-inch, 1/2-inch drive socket two seat belt washers (8), two and ratchet handle, and 11/16-inch brackets (2) lockwashers (9), and open-end wrench, unscrew and take two nuts (10) apart. b. Get rid of lockwashers (9). 4. Seat belt (6) Two seat belt Take off. brackets (2) 2-1150