|
| |
TM 5-2420-222-20-2
SEAT - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
ASSEMBLY - CONTINUED
127. Seat frame (1)
Shock absorber (2)
Place in position.
with assembled
Make sure bolt in shock absorber
parts
support goes through slot in link.
128. Seat frame (1)
Bushing (4)
Place in position.
and shock absorber
shaft (3)
129.
Two rings (5)
Using long roundnose pliers, place in
position.
130. Link (6)
Shock absorber
Place in position.
support (7) with
assembled parts
131. Shock absorber
Two wing nuts (8),
Screw together and tighten using slip-
support (7) and
washers (9), and
joint pliers.
link (6)
bolt (10)
132
Seat frame (1)
Two seat belt
Place in position.
brackets (11) with
attached seat belts
133. Seat frame (1)
Two nuts (12), two
Screw together and tighten using 3/4-inch,
and two seat
new lockwashers
1/2-inch drive socket and ratchet handle,
belt brackets (11)
(13), and two
and 3/4-inch open-end wrench.
screws (14)
Make sure washers are located
properly.
134. Lower seat
Adjustable support
Place in position noted during disassembly.
support (15)
(16) with assembled
parts
135. Lower seat
Two washers (17)
Screw in and tighten using 3/4-inch, 1/2-
support (15) and
and screws (18)
inch drive socket and ratchet handle.
adjustable
support (16)
136. Seat frame (1)
Seat cushion (19)
Place in position.
137. Seat cushion (19)
Three screws (20)
a.
Screw in part way.
and seat frame (1)
b.
Using 9/16-inch open-end wrench,
tighten.
2-1146
|
