|
| |
TM 5-2420-222-20-2
SEAT - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
ASSEMBLY - CONTINUED
WARNING
Shock absorber is under strong spring tension. Release tension slowly to avoid injury.
116. Shock absorber (1)
Lower cap (3)
d.
Release pressure on spring (2) so that
and spring (2) -
it seats in cap (3).
Continued
e.
Take shock absorber (1) with assem-
bled parts out of arbor press.
117. Shock absorber
Bushing (5)
Place in position.
support (4)
118.
Bolt (6)
Place in position in forward hole of
support (4).
119.
Shock absorber (1)
Place in position.
with assembled parts
120. Two shock absorber
Two washers (8)
Place in position.
bushings (7)
121. Shock absorber
Shaft (9)
Place in position.
support (4), shock
Make sure bolt gets trapped in
absorber (1),
position in shock absorber support.
bushing (5), two
washers (8), and
two shock absorber
bushings (7)
122. Shaft (9) and two
Two rings (10)
a.
Using C-frame style valve spring lifter,
washers (8)
compress bushings (7).
b.
Using long roundnose pliers, place
rings (10) in position on shaft (9).
c.
Release pressure on bushings (7) and
take off C-frame style valve spring
lifter.
123. Shock absorber
Two rings (11)
Using long roundnose pliers, place in
support (4),
position.
bushing (5),
and shaft (9)
2-1144
|
