|
| |
TM 5-2420-222-20-2
PARKING BRAKE WIRING HARNESS (SERIAL NUMBERS 319995 THRU 342573 ONLY) - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
14. Loader backhoe
Parking brake
Route into place as noted during removal.
harness (1)
15. Relay (2)
Two terminals
a.
Put in place.
(3 and 4)
b.
Take off tags.
16. Cowl support (5),
Screw (6),
Screw together and tighten using 1/4-inch
relay (2), and
new lockwasher (7),
flat-tip screwdriver and 11/32-inch box
two terminals
and nut (8)
wrench.
(3 and 4)
17. Three relay
Connector (10)
a.
Push on.
terminals (9)
b.
Take off tag.
18 Light lead
Connector (12)
a.
Plug in.
connector (11)
b.
Take off tag.
19 Time total meter
Connector (14)
a.
Push on.
terminal (13)
b.
Take off tag.
20. Two connectors
Two connectors
a.
Plug in.
(15 and 16)
(17 and 18)
b.
Take off tags.
21. Ignition switch
Terminal (21)
a.
Put on.
bottom terminal (19)
b.
Take off tag.
and nut (20)
22. Ignition switch
New lockwasher (22)
Screw on and tighten using 3/8-inch box
bottom terminal (19)
and nut 23)
wrench.
and terminal (21)
23. Two warning
Connector (25)
a.
Push on.
switch
b.
Take off tag.
terminals (24)
24. Parking brake
New plastic
a.
Put on same number in same location as
harness (1)
bands (26)
noted in removal.
and loader
b.
Using slip-joint pliers, pull tight.
backhoe
2-498
|
