|
| |
TM 5-2420-222-20-2
SEAT - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
DISASSEMBLY - CONTINUED
69.
Pivot plate (1)
Thrust roller
Take off.
bearing (2)
CLEANING
NOTE
For more information on how to clean parts, go to General Maintenance Instructions (page 2-137).
70.
Four shock absorber
a.
Using clean rags dampened with
bushing (3), grip
solution of detergent and water,
(4), back seat
wipe clean.
cushion (5), and
b.
Using clean water, rinse.
cushion (6)
c.
Using clean, dry rags, wipe dry.
71.
Thrust roller
Clean (TM 9-214).
bearing (2)
WARNING
Drycleaning solvent P-D-680 is toxic and flammable. Wear protective goggles and gloves and use
only in a well ventilated area. Avoid contact with skin, eyes, and clothes and don’t breathe vapors.
Do not use near open flame or excessive heat. The flashpoint is 1000F to 138°F (380 to 590C). If
you become dizzy while using cleaning solvent, get fresh air immediately and get medical aid. If
contact with eyes is made, wash your eyes with water and get medical aid immediately.
72.
Seat frame (7),
a.
Using clean rags dampened with dry-
adjustable support
cleaning solvent, wipe clean.
(8), seat base (9),
b.
Using clean, dry rags, wipe dry.
pivot plate (1),
lower seat support
(10), and shock
absorber (11)
73.
All other metal
a.
Clean in drycleaning solvent.
parts
b.
Using clean, dry rags, wipe dry.
2-1134
|
