TM 5-2420-222-20-2 SEAT - CONTINUED ACTION LOCATION ITEM REMARKS DISASSEMBLY - CONTINUED 59. Lower seat support Four nuts (5), a. Using 1/2-inch open-end wrench, (1) and two seat lockwashers (6), unscrew and take apart. adjusters (4) and screws (7) Slide seat adjusters forward and backward to access screws. b. Get rid of lockwashers (6). 60. Two seat Lower seat Take off. adjusters (4) support (1) NOTE Steps 61 thru 64 only apply to loader backhoes with Serial Numbers 235786 thru 235999. 61. Two seat adjusters Four flat machine a. Using 7/32-inch flat-tip screwdriver (4) and two adjuster screws (9), lock- and 11/16-inch open-end wrench, adapters (8) washers (10), and unscrew and take apart. nuts (11) Slide seat adjusters forward and backward to access screws. b. Get rid of lockwashers (10). 62. Two adjuster Two seat Take off. adapters (8)) adjusters (4) 63. Pivot plate (2) and Four screws (12), a. Using two 1/2-inch open-end two adjuster lockwashers (13), wrenches, unscrew and take apart. adapters (8) and nuts (14) b. Get rid of lockwashers (13). 64. Pivot plate (2) Two adjuster Take off. adapters (8) NOTE Steps 65 thru 66 only apply to loader backhoes with Serial Numbers 319995 thru 342573. 65. Pivot plate (2) Four nuts (15), a. Using 1/2-inch open-end wrench, and two seat lockwashers (16), unscrew and take apart. adjusters (4) and screws (17) Slide seat adjusters forward and backward to access screws. b. Get rid of lockwashers (16). 66. Pivot plate (2) Two seat Take off. adjusters (4) 2-1132