|
| |
TM 5-2420-222-20-2
SEAT - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
DISASSEMBLY - CONTINUED
27.
Two shock absorber
Two washers (2)
Take off.
bushings (1)
28.
Shock absorber
Shock absorber (4)
Take out.
support (3)
with assembled parts
29.
Bolt (5)
a.
Take out.
b.
Take support (3) out of machinist’s
vise with vise jaw caps.
30.
Bushing (6)
Take out.
WARNING
Shock absorber is under strong spring tension. Release tension slowly to avoid injury.
31.
Shock absorber (4)
Lower cap (8)
a.
Place shock absorber (4) with assem-
and spring (7)
bled parts in arbor press and compress
spring (7).
b.
Using multiple tongue and groove slip-
joint pliers, turn shock absorber (4)
clockwise one-quarter turn.
c.
Take shock absorber (4) with assembled
parts out of arbor press.
d.
Take off.
32.
Shock absorber (4)
Spring (7) and upper
Take off.
cap (9)
33.
Two shock absorber
Take out.
bushings (1)
34.
Two shock absorber
Take out.
bushings (10)
35.
Seat frame (11),
Two screws (14),
Using 9/16-inch, 3/8-inch drive socket
shock absorber
four washers (15),
and ratchet handle, and 9/16-inch open-
link (12), and
two washers (16),
end wrench, unscrew and take apart.
two upper links (13)
and two nuts (17)
2-1126
|
