|
| |
TM 5-2420-222-20-2
SEAT - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
DISASSEMBLY - CONTINUED
16.
Seat frame (1) and
Two screws (3), two
a.
Using 3/4-inch, 1/2-inch drive socket
two seat belt
lockwashers (4), and
and ratchet handle, and 3/4-inch
brackets (2)
two nuts (5)
open-end wrench, unscrew and take
apart.
b.
Get rid of lockwashers (4).
17.
Seat frame (1)
Two seat belt
Take off.
brackets (2) with
attached seat belts
18.
Shock absorber
Two bolts (8),
Using slip-joint pliers, unscrew and
support (6) and
washers (9), and
take apart
link (7)
wing nuts (10)
One bolt will stay with shock
absorber support.
19.
Seat frame (1) and
Two rings (12)
Using 7/32-inch flat-tip screwdriver,
shock absorber
take off.
shaft (11)
20.
Shock absorber shaft
Two rings (14)
Using 7/32-inch flat-tip screwdriver, take
(11) and two
off.
washers (13)
21.
Seat frame (1),
Shock absorber
Using 3/8-inch straight drive-pin punch,
shock absorber (15),
shaft (11)
and 1-pound head ball-peen hammer, drive
two washers (13),
out.
and two shock
absorber
bushings (16)
22.
Two shock absorber
Two washers (13)
Take off.
bushings (16)
23.
Seat frame (1) and
Shock absorber
a.
Take out.
link (7)
support (6) with
b.
Place in machinist’s vise with vise
assembled parts
jaw caps.
24.
Shock absorber sup-
Two rings (19)
Using 7/32-inch flat-tip screwdriver,
port (6), bushing
take off.
(17), and shaft (18)
2-1124
|
