|
| |
TM 5-2420-222-20-2
LEFT REAR PLATFORM (SERIAL NUMBERS 319995 THRU 342573 ONLY)
This task covers:
a.
Removal (page 2-1114)
c.
Inspection/Replacement (page 2-1115)
b.
Cleaning (page 2-1114)
d.
Installation (page 2-1116)
INITIAL SETUP
Tools
Materials/Parts - Continued
Handle, ratchet, 3/8-inch drive
Solvent, drycleaning (item 28, Appendix C)
Socket, 3/8-inch drive, 9/16-inch
Personnel Required
Materials/Parts
One
Rags, wiping (item 21, Appendix C)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Left rear platform
Screw (3) and
Using 9/16-inch, 3/8-inch drive socket
(1) and main
washer (4)
and ratchet handle, unscrew and take out.
frame (2)
2.
Main frame (2) and
Left rear
Take off.
center platform (5)
platform (1)
CLEANING
NOTE
For more information on how to clean parts, go to General Maintenance Instructions (page 2-137).
WARNING
Drycleaning solvent P-D-680 is toxic and flammable. Wear protective goggles and gloves and use only in
a well ventilated area. Avoid contact with skin, eyes, and clothes and don’t breathe vapors. Do not use
near open flame or excessive heat. The flashpoint is 100°F to 138°F (38° to 59°C). If you become dizzy
while using cleaning solvent, get fresh air immediately and get medical aid. If contact with eyes is made,
wash your eyes with water and get medical aid immediately.
2-1114
|
