|
| |
TM 5-2420-222-20-2
CENTER PLATFORM SUPPORT - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
8.
Two fender braces
Center platform
Using 36-inch pinch bar, place in position.
(2), and canopy or
support (1)
Make sure to aline screw holes.
rollover protective
structure (3)
9.
Center platform
Four nuts (4),
a.
Screw together part way.
support (1), two
lockwashers (5),
b.
Using 3/4-inch, 1/2-inch drive socket
fender braces (2)
washers (6), and
and ratchet handle, tighten.
and canopy or roll-
screws (7)
over protective
structure (3)
NOTE
FOLLOW-ON MAINTENANCE:
1. Install right inner platform ramp (page 2-1095).
2. Install left outer platform ramp (page 2-1073).
3. Install left platform (page 2-1060).
4. Install center platform (page 2-1099).
TA243262
TASK ENDS HERE
2-1109
|
