|
| |
TM 5-2420-222-20-2
CENTER PLATFORM
This task covers:
a.
Removal (page 2-1100)
d.
Inspection/Replacement (page 2-1103)
b.
Disassembly (page 2-1100)
e.
Assembly (page 2-1104)
c.
Cleaning (page 2-1102)
f.
Installation (page 2-1104)
INITIAL SETUP
Tools
Materials/Parts - Continued
Handle, ratchet, 3/8-inch drive
NOTE
Pliers, slip-joint
Socket, 3/8-inch drive, 9/16-inch
The following materials only apply
Wrench, open-end, 3/4-inch
to loader backhoes with Serial
Numbers 319995 thru 342573.
NOTE
Adhesive, metal bonding (item 1, Appendix C)
The following tool only applies
Solvent, cleaning compound (item 27,
to loader backhoes with Serial
Appendix C)
Numbers 319995 thru 342573.
Personnel Required
Knife, putty
One
Materials/Parts
Equipment Conditions
Detergent, GP (item 7, Appendix C)
Lockwasher, platform screw
1.
Seat removed (page 2-1120)
(two required)
2.
Right platform removed (page 2-1079)
Rags, wiping (item 21, Appendix C)
3.
Battery cover removed
Solvent, drycleaning
(TM 5-2420-222-10)
(item 28, Appendix C)
2-1099
|
