|
| |
TM 5-2420-222-20-2
RIGHT OUTER PLATFORM RAMP - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSPECTION/REPLACEMENT - CONTINUED
8.
Right outer ramp (1)
Look for cracks, breaks, and abnormal
bends.
9.
Pad (2)
Look for cracks, tears, and crumbling.
10.
All threaded parts
Look for damaged threads.
REPAIR
11.
Right outer ramp (1)
If threads are damaged, using screw
threading set, restore.
ASSEMBLY
NOTE
Step 12 only applies to loader backhoes with Serial Numbers 319995 thru 342573.
12.
Right outer ramp (1)
Pad (2)
a.
If removed, apply metal adhesive in
0.06 to 0.18-inch (1.52 to 4.57 mm)
wide beads, in 2.00-inch (50.8 mm) or
smaller squares.
Make sure that outside bead is within
0.25-inch (6.35 mm) of edge with no
gaps.
b.
Line up and press into place to transfer
some metal adhesive.
c.
Take off and allow metal adhesive to set
for two minutes.
d.
Line up and press firmly into place.
INSTALLATION
13.
Front cross member
Right outer ramp (1)
Place in position.
(3), center platform
support (4), and
inner platform
ramp (5)
14.
Right outer ramp (1)
Washer (6), new
Screw in part way.
and front cross
lockwasher (7),
member (3)
and screw (8)
2-1092
|
