|
| |
TM 5-2420-222-20-2
RIGHT OUTER PLATFORM RAMP
This task covers:
a.
Removal (page 2-1074)
e.
Repair (page 2-1076)
b.
Disassembly (page 2-1074)
f.
Assembly (page 2-1077)
c.
Cleaning (page 2-1076)
g.
Installation (page 2-1077)
d.
Inspection/Replacement (page 2-1076)
INITIAL SETUP
Tools
Materials/Parts - Continued
Handle, ratchet, 3/8-inch drive
Solvent, drycleaning (item 28, Appendix C)
Socket, 3/8-inch drive, 9/16-inch
Threading set, screw
NOTE
NOTE
The following materials only apply
to loader backhoes with Serial
The following tool only applies
Numbers 319995 thru 342573.
to loader backhoes with Serial
Numbers 319995 thru 342573.
Adhesive, metal bonding (item 1,
Appendix C)
Knife, putty
Solvent, cleaning compound (item 27,
Appendix C)
Materials/Parts
Personnel Required
Detergent, GP (item 7, Appendix C)
Lockwasher, ramp screw
One
(three required)
Rags, wiping (item 21, Appendix C)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Right outer platform
Screw (3),
a.
Using 9/16-inch, 3/8-inch drive socket
ramp (1) and front
lockwasher (4),
and ratchet handle, unscrew and take
cross member (2)
and washer (5)
out.
b.
Get rid of lockwasher (4).
2.
Right outer platform
Screw (7) and
a.
Using 9/16-inch, 3/8-inch drive socket
ramp (1) and center
lockwasher (8)
and ratchet handle, unscrew and take
platform support (6)
out.
b.
Get rid of lockwasher (8).
2-1088
|
