|
| |
TM 5-2420-222-20-2
RIGHT PLATFORM - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
WARNING
Make sure that loader bucket and backhoe bucket are lowered to ground, or wheels are blocked, to keep loader
backhoe from rolling before performing maintenance on parking brake.
REMOVAL
1. Brake rod (1) and
Cotter pin (3)
a.
Using long roundnose pliers, straighten
pin (2)
ends and take out.
b.
Get rid of.
2. Brake rod (1) and
Pin (2)
Pull out.
and parking brake
arm (4)
3. Brake lever (5)
Brake latch
Push in and hold.
button (6)
4. Parking brake
Brake lever (5)
Move as far up and back as they will go.
support (7) and
and brake rod (1)
parking brake
arm (4)
5. Brake lever (5)
Brake latch
Release.
button (6)
6. Platform (8) and
Two screws (10) and
a.
Using 9/16-inch, 3/8-inch drive socket
center platform
lockwashers (11)
and ratchet handle, unscrew and take
support (9)
out.
b.
Get rid of lockwashers (11).
7. Platform (8) and
Screw (13),
a.
If present, using 9/16-inch, 3/8-inch
front cross
lockwasher (14),
drive socket and ratchet handle, un-
member (12)
washer (15)
screw and take out.
b.
Get rid of lockwasher (14).
8. Front cross member
Platform (8) with
Take off.
(12), rear cross
assembled parts,
member (16), center
if present
platform
support
(9), and center
platform (17)
2-1080
|
