|
| |
TM 5-2420-222-20-2
LEFT OUTER PLATFORM RAMP - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1. Ramp (1) and front
Screw (3),
a.
Using 9/16-inch, 3/8-inch drive
cross member (2)
lockwasher (4),
socket and ratchet handle, unscrew
and washer (5)
and take out.
b.
Get rid of lockwasher (4).
2. Ramp (1) and center
Screw (7) and
a.
Using 9/16-inch, 3/8-inch drive
platform support (6)
lockwasher (8)
socket and ratchet handle, unscrew
and take out.
b.
Get rid of lockwasher (8).
3. Front cross member
Ramp (1) with
Take off.
(2) and center plat-
assembled pads
form support (6)
(9, 10, and 11)
if present
DISASSEMBLY
NOTE
Step 4 only applies to loader backhoes with Serial Numbers 319995 thru 342573.
WARNING
Water soluble cleaning compound solvent is flammable and fumes are toxic. Flashpoint is 2200F (1040C).
Boiling point is 2120F (1000C). Do not store in temperatures above 1500F (650C) or below 350F (20C). Do not
use near open flame or excessive heat. Do not wear jewelry, wear rubber gloves and goggles, and use only in
well ventilated area. Avoid contact with skin, eyes, and clothes, and don’t breathe vapors. Avoid contact with
acids, aluminum, or zinc; chemical reaction may result. If you become dizzy while using cleaning compound
solvent, get fresh air immediately and get medical aid. If contact with eyes is made, wash your eyes with water
and get medical aid immediately.
CAUTION
Ramp pads may be destroyed during removal. Do not remove them unless inspection shows need for
replacement.
4. Ramp (1)
Pads (9, 10, and 11)
a.
Note position for proper placement
during installation.
2-1074
|
