|
| |
TM 5-2420-222-20-2
LEFT INNER PLATFORM RAMP
This task covers:
a.
Removal (page 2-1066)
d.
Inspection/Replacement (page 2-1070)
b.
Disassembly (page 2-1068)
e.
Assembly (page 2-1070)
c.
Cleaning (page 2-1069)
f.
Installation (page 2-1070)
INITIAL SETUP
Tools
Materials/Parts - Continued
Handle, ratchet, 3/8-inch drive
Rags, wiping (item 21, Appendix C)
Socket, 3/8-inch drive, 9/16-inch
Solvent, drycleaning (item 28, Appendix C)
NOTE
NOTE
The following tool only applies
The following materials only apply
to loader backhoes with Serial
to loader backhoes with Serial
Numbers 319995 thru 342573.
Numbers 319995 thru 342573.
Knife, putty
Adhesive, metal bonding (item 1, Appendix C)
Solvent, cleaning compound (item 27,
Materials/Parts
Appendix C)
Detergent, GP (item 7, Appendix C)
Personnel Required
Lockwasher, ramp screw (two required)
One
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1. Left inner platform
Screw (3) and
a.
Using 9/16-inch, 3/8-inch drive socket
ramp (1) and left
lockwasher (4)
and ratchet handle, unscrew and take
outer platform
out.
ramp (2)
b.
Get rid of lockwasher (4).
2. Left inner platform
Screw (6) and
a.
Using 9/16-inch, 3/8-inch drive socket
ramp (1) and center
lockwasher (7)
and ratchet handle, unscrew and take
platform support (5)
out.
b.
Get rid of lockwasher (7).
2-1066
|
