|
| |
TM 5-2420-222-20-2
LEFT PLATFORM - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSPECTION/REPLACEMENT - CONTINUED
7.
Left platform (1)
Look for cracks, breaks, and abnormal
bends.
8.
All attaching
Look for damaged threads.
hardware
9.
Pad (2), if present
Look for cracks, tears, and crumbling.
ASSEMBLY
NOTE
Step 10 only applies to loader backhoes with Serial Numbers 319995 thru 342573.
10. Left platform (1)
Pad (2)
a.
If removed, apply metal adhesive in
0.06 to 0.18-inch (1.52 to 4.57 mm)
wide beads, in 2.00-inch (50.8 mm) or
smaller squares.
Make sure that outside bead is within
0.25-inch (6.35 mm) of edge with no
gaps.
b.
Line up and press into place to transfer
some metal adhesive.
c.
Take off and allow metal adhesive to
set for two minutes.
d.
Line up and press firmly into place.
INSTALLATION
11. Front cross member
Left platform (1)
Place in position.
(3) and center plat-
with assembled
form support (4)
pad (2), if present
12. Front cross
Washer (5), new
Screw in part way.
member (3) and
lockwasher (6),
left platform (1)
and screw (7)
2-1064
|
