|
| |
TM 5-2420-222-20-2
LEFT PLATFORM
This task covers:
a.
Removal (page 2-1060)
d.
Inspection/Replacement (page 2-1063)
b.
Disassembly (page 2-1061)
e.
Assembly (page 2-1064)
c.
Cleaning (page 2-1062)
f.
Installation (page 2-1064)
INITIAL SETUP:
Tools
Materials/Parts - Continued
Handle, ratchet, 3/8-inch drive
Rags, wiping (item 21, Appendix C)
Socket, 3/8-inch drive, 9/16-inch
Solvent, drycleaning (item 28, Appendix C)
NOTE
NOTE
The following tool only applies
The following materials only apply
to loader backhoes with Serial
to loader backhoes with Serial
Numbers 319995 thru 342573.
Numbers 319995 thru 342573.
Knife, putty
Adhesive, metal bonding (item 1, Appendix C)
Solvent, cleaning compound (item 27,
Materials/Parts Appendix C)
Detergent, GP (item 7, Appendix C)
Personnel Required
Lockwashers (two required)
One
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1. Center platform
Screw (3) and
a.
Using 9/16-inch, 3/8-inch drive socket
support (1) and
lockwasher (4)
and ratchet handle, unscrew and take
left platform (2)
out.
b.
Get rid of lockwasher (4).
2. Front cross
Screw (6),
a.
Using 9/16-inch, 3/8-inch drive socket
member (5) and
lockwasher (7),
and ratchet handle, unscrew and take
left platform (2)
and washer (8)
out.
b.
Get rid of lockwasher (7).
2-1060
|
