|
| |
TM 5-2420-222-20-2
STABILIZERS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
32.
Adapter (1)
Hydraulic hose (2)
Using 11/16-inch and 7/8-inch open-end
wrenches, tighten.
33.
Adapter (3)
Hydraulic hose (4)
Using 11/16-inch and 7/8-inch open-end
wrenches, tighten.
34.
Loader backhoe
Transmission
Check oil level and add proper amount
and grade if required
(TM 5-2420-222-10).
Do not shut down engine at this time.
35.
Engine
Run at high idle (TM 5-2420-222-10).
36.
Two hydraulic hoses
a.
Operate stabilizer
(2 and 4) and adapters
(TM 5-2420-222-10).
(1 and 3)
b.
If leaking at any connection, tighten
using 11/16-inch and 7/8-inch open-
end wrenches.
c.
If leaking does not stop, shut down
engine (TM 5-2420-222-10) and
replace defective hydraulic lines
or adapters as outlined in Backhoe
Control Valve-to-Backhoe Stabilizer
Cylinder Oil Lines (page 2-1622).
37.
Engine
If still running, shut down
(TM 5-2420-222-10).
2-1058
|
