|
| |
TM 5-2420-222-20-2
STEP
This task covers:
a.
Removal (page 2-1046)
c.
Inspection/Replacement (page 2-1047)
b.
Cleaning (page 2-1046)
d.
Installation (page 2-1048)
INITIAL SETUP:
Tools
Materials/Parts - Continued
Handle, ratchet, 1/2-inch drive
Rags, wiping (item 21, Appendix C)
Socket, 112-inch drive, 9116-inch
Solvent, drycleaning (item 28, Appendix C)
Wrench, open-end, 9116-inch
Personnel Required
Materials/Parts
One
Lockwasher, fender step screw
(four required)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Left fender (1) and
Four screws (3),
a.
Using 9/16-inch open-end wrench,
step (2)
lockwashers (4),
9/16-inch, 1/2-inch drive socket, and
washers (5), and
ratchet handle, unscrew and take apart.
nuts (6)
b.
Get rid of lockwashers (4).
2.
Left fender (1)
Step (2)
Take off.
CLEANING
NOTE
For more information on how to clean parts, go to General Maintenance
Instructions (page 2-137).
2-1046
|
