|
| |
TM 5-2420-222-20-2
GRILLE HOUSING - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
7.
Front support (1)
Grille housing (2)
With help of assistant, take off.
DISASSEMBLY
WARNING
Water soluble cleaning compound solvent is flammable and fumes are toxic.
Flashpoint is 220°F (104°C). Boiling point is 212°F (100°C). Do not store in
temperatures above 150°F (65°C) or below 35°F (2°C). Do not use near open flame
or excessive heat. Do not wear jewelry, wear rubber gloves and goggles, and use
only in well ventilated area. Avoid contact with skin, eyes, and clothes, and don't
breathe vapors. Avoid contact with acids, aluminum, or zinc; chemical reaction
may result. If you become dizzy while using cleaning compound solvent, get fresh
air immediately and get medical aid. If contact with eyes is made, wash your eyes
with water and get medical aid immediately.
CAUTION
Do not remove cushion unless inspection shows need for replacement. Cushion
may be destroyed during removal.
8.
Grille housing (2)
Cushion (3)
a.
Note position for proper placement
during installation.
b.
Using clean rags and cleaning com-
pound solvent, dissolve adhesive.
c.
Using putty knife under edge, pull
up corner.
d.
Wet with more cleaning compound
solvent and continue to pull off.
e.
Repeat steps b thru d above until
completely removed.
f.
Using clean rag dampened with clean-
ing compound solvent, remove all
adhesive from grille housing (2).
g.
Rinse grille housing (2) with clean
water.
h.
Using clean, dry rags, wipe dry.
CLEANING
NOTE
For more information on how to clean parts, go to General Maintenance
Instructions (page 2-137).
2-1038
|
