|
| |
TM 5-2420-222-20-2
HOOD - CONTINUED
NOTE
FOLLOW-ON MAINTENANCE:
1.
Install muffler extension stack assembly (page 2-347).
2.
Install side grilles (TM 5-2420-222-10).
NOTE
Perform the following only on loader backhoes with
Serial Numbers 319995 thru 342573.
Install engine starting aid injection solenoid (page 2-296)
TASK ENDS HERE
GRILLE HOUSING
This task covers:
a.
Removal (page 2-1036)
e.
Repair (page 2-1040)
b.
Disassembly (page 2-1038)
f.
Assembly (page 2-1040)
c.
Cleaning (page 2-1038)
g.
Installation (page 2-1040)
d.
Inspection/Replacement (page 2-1040)
INITIAL SETUP:
Tools
Materials/Parts
Extension, 3/8-inch drive, 5-inch
Adhesive, metal bonding (item 1, Appendix C)
Extension, 1/2-inch drive, 5-inch
Detergent, GP (item 7, Appendix C)
Handle, ratchet, 1/2-inch drive
Lockwasher, fuel tank housing screw (four
Handle, ratchet, 3/8-inch drive
required)
Knife, putty
Lockwasher, grille housing front support screw
Socket, 3/8-inch drive, 3/4-inch
(two required)
Socket, 1/2-inch drive, 1 11/8-inch
Rags, wiping (item 21, Appendix C)
Socket, deep, 3/8-inch drive,
Solvent, cleaning (item 27, Appendix C)
9/16-inch
Solvent, drycleaning (item 28, Appendix C)
Threading set, screw
Wrench, open-end, 3/4-inch
2-1035
|
