|
| |
TM 5-2420-222-20-2
CENTER BACKHOE CONTROL GUARD - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
CLEANING - CONTINUED
WARNING
Drycleaning solvent P-D-680 is toxic and flammable. Wear protective goggles and
gloves and use only in a well ventilated area. Avoid contact with skin, eyes, and
clothes and don’t breathe vapors. Do not use near open flame or excessive heat.
The flashpoint is 100°F to 138°F (38° to 59°C). If you become dizzy while using
cleaning solvent, get fresh air immediately and get medical aid. If contact with
eyes is made, wash your eyes with water and get medical aid immediately.
4.
Center backhoe
a.
Using clean rags dampened with dry-
control guard (1)
cleaning solvent, wipe clean.
b.
Using clean, dry rags, wipe dry.
5.
All attaching
a.
Clean in drycleaning solvent.
hardware
b.
Using clean, dry rags, wipe dry.
INSPECTION/REPLACEM ENT
NOTE
For more information on how to inspect parts, go to General Maintenance
Instructions (page 2-137).
Replace defective parts as needed.
6.
Center backhoe
Look for cracks, breaks, and abnormal
control guard (1)
bends.
7.
All attaching
Look for damaged threads.
hardware
INSTALLATION
8.
Right backhoe
Center backhoe
Place in position.
control guard (2)
control guard (1)
and left backhoe
control guard (3)
2-1004
|
