|
| |
TM 5-2420-222-20-2
CENTER BACKHOE CONTROL GUARD
This task covers:
a.
Removal (page 2-1002)
c.
Inspection/Replacement (page 2-1004)
b.
Cleaning (page 2-1003)
d.
Installation (page 2-1004)
INITIAL SETUP:
Tools
Materials/Parts - Continued
Handle, ratchet, 1/2-inch drive
Solvent, drycleaning (item 28, Appendix C)
Socket, 1/2-inch drive, 9/16-inch
Personnel Required
Materials/Parts
One
Lockwasher, guard screw (four required)
Rags, wiping (item 21, Appendix C)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Right backhoe
Two screws (3) and a.
Using 9/16-inch, 1/2-inch drive socket
control guard (1)
lockwashers (4)
and ratchet handle, unscrew and take
and center backhoe
out.
control guard (2)
b.
Get rid of lockwashers (4).
2.
Left backhoe
Two screws (6) and
a.
Using 9/16-inch, 1/2-inch drive socket
control guard (5)
lockwashers (7)
and ratchet handle, unscrew and take
and center backhoe
out.
control guard (2)
b.
Get rid of lockwashers (7).
3.
Right backhoe
Center backhoe
Take off.
control guard (1)
control guard (2)
and left backhoe
control guard (5)
2-1002
|
